ePaint - The New Wave of Bottom Paint

Save & Print EP-PRIME 1000 Technical Information Here

Mutli-Purpose Epoxy Primer

Product Description:
EP-PRIME 1000 is a robust, easy to use, two-part, epoxy primer recommended for immersion service. EP-Prime 1000 offers excellent corrosion protection on metal surfaces, improves adhesion of any ePaint bottom paint to all hull types, and offers water migration protection on fiberglass boat hulls. EP-PRIME 1000 may be applied by brush, roller or spray but spray application is preferred for smoothest appearance and film build control.

Uses:
> Corrosion protection on all underwater metals
> Improves adhesion of any ePaint bottom paint to fiberglass, aluminum and wood hulls
> Minimizes water absorption and an excellent choice for osmotic blister prevention on fiberglass hulls

Features:
> Lowers the cost of metal surface prepartion as it is self-priming on metal, no other chemical treatments required
> High build epoxy and low VOC> Superior corrosion protection on metal surfaces
> Provides protection to fiberglass hulls from water migration and osmotic blistering
> Easy to apply by roll or spray
> Surface tolerant
> Cures at low temperatures
> Low VOC

Technical Overview:
> Available colors:
    White (#405)
    Haze Gray (#705)
    Oxide Red (#505)
> Packaging: Two component, gallons kits
> Thinner: ePaint EP-10
> Coverage:
    Tie-coat, 311 ft2/gal at 3.5 mils dry per coat
    Metal and barrier protection, 242 ft2/gal at 4.5 mils dry per coat
> Number of Coats:
    Tie-coat, one coat
    Metal, two coats
    Barrier protection, three coats
> Method of Application: Traditional painting techniques
    Conventional spray
    Airless spray
    Roller (1/4" to 1/2" nap),
    Brush
> Finish: Semi-gloss
> Not Recommended For: Application over existing antifouling or foul-release coatings, remove first

Save & Print EP-PRIME 1000 Technical Information Here

Save & Print EP-PRIME 1000 Material Safety Data Sheets (MSDS) Part A and Part B