Netminder Release Coating

$80.00 – $2,280.00

  • Single season protection for FLUPSY, nets, bags, ropes, cages, traps and buoys
  • Advanced water-based silicone release coating
  • Biocide free, photo active release coating
  • Flexible
  • Soap and water clean up
  • Can be applied by spray, brush, roller, and dipping

Please contact us for the availability of 30 gal. drums.  Shipping charges apply to 30 gal drums.

Five gal pail flat rate shipping includes Federal Express heavy item charge.

Additional Information
Size: Gallon, Three and a half Gallon Pail, Five Gallon Pail, 30 Gal Drum
Color: Bright white, Light Gray

Clear
SKU: N/A Categories: , , , , , ,
  • Single season protection for FLUPSY, nets, bags, ropes, cages, traps and buoys
  • Advanced water-based silicone release coating
  • Biocide free, photo active release coating
  • Flexible
  • Soap and water clean up
  • Can be applied by spray, brush, roller, and dipping

Additional Information
Size: Gallon, Five Gallon Pail, 30 Gal Drum
Color: Bright white, Light Gray

Additional information

Color

Bright White, Light Gray
Size

One (1) Gallon, Three and a half (3.5) Gallon, Five (5) Gallon, 30 US Gallon Drum

Features

FLUPSY

  • Greater yield
  • No need for weekly scraping
  • Healthier growing conditions

Grow out bags

  • 2X growth rates! Coated vs. uncoated
  • Clean gear = Healthier shellfish
  • Reduced maintenance costs

Cages

  • Less time from FLUPSY to market
  • Reduce labor costs & extend gear life
  • $25K savings/year for 1000 cage farm

Buoys

  • More buoyant with less growth
  • Clean gear is easier to handle
  • Less drag and strain on mooring gear

Overview

Thinner: water
Application: traditional methods
The recommended number of coats: 1
Compatibility:

  • Apply to plastic and natural fiber netting, capge/traps, and buoys
  • Adheres to or encapsulates HDPE, polypropolene, nylon, polyurethane and other plastics

Considerations:

  • Netiminder does not contain a pesticide and is not considered an antifouling coating
  • Do not apply in cold, wet conditions
  • 24 hours dry time needed above 60 deg F before using the gear
  • Net plastic gear must be degreased to remove the mold release agent

For complete application procedures and requirements see the Tech Data Sheet tab.

Tech Data Sheet

PENDING Tech Data Sheet

SDS

PENDING Safety Data Sheet

Related products