SUNWAVE Photo-Active Coating


  • Biocide free release coating
  • Features ePaint’s patented photo-active coating technology
  • Hard and durable finish
  • For use on fiberglass and aluminum boats and all running gear
  • Water-based and low VOC
  • Easy and safe to apply


  • * ePaint Company recommends three full coats plus two additional coats at the waterline.
    This calculation is an estimate based only on overall length and beam of your boat; the actual amount of surface area may be slightly different depending on unforeseen factors such as hull design, loss of product during the application, etc.
SKU: N/A Categories: ,
  • Hard mar-resistant finish
  • Stands up to periodic maintenance scrubbing
  • Ablative resin chemistry to wear away over time preventing paint build up
  • Compatible with most epoxy primers, but not compatible over most traditional antifouling paints
  • Routine maintenance scrubbing or boat motion will likely be needed to keep the hull clean
  • Growth should wipe away without paint loss

ePaint Sunwave® coating technology was developed, uses materials from, and is proudly manufactured in the USA. Please contact at for more information on ePaint Sunwave® or other ePaint products.

Additional information



Select Color

White, Grey


  • Economically priced
  • Self-priming on aluminum surfaces
  • Hard, photo-ablative surface
  • No coat-to-launch time
  • Safe to haul in and out of the water
  • Uses:
    • Pontoon boats
    • Dry-stacked boats
    • Dry-sailed boats
    • Trailered boats


  • Coverage: 210 ft2/gal
  • Available colors: White and Gray
  • Packaging: two component system, available in gallons only
  • Mixing ratio: 4.3 Part A to 1.0 Part B
  • Thinner: mineral-free bottled water, generally not required, 10% max by volume
  • Clean up: water
  • Application: Traditional methods – roll (1/4” nap or foam), brush, or spray (HVLP)
  • Finish: hard eggshell-like
  • Recommended Number of Coats: 2 full coats with additional coat(s) around waterline and high wash areas for longest service life
  • Safe for: fiberglass, aluminum, steel (primed), wood (primed), epoxy-type primers, and many existing hard-type bottom paints

For application procedures and requirements see the Tech Data Sheet tab.

Tech Data Sheet

Download Tech Data Sheet link


Download Safety Data Sheet



There are no reviews yet.

Be the first to review “SUNWAVE Photo-Active Coating”

Your email address will not be published.